DC Backup Power Adapter Cable for Durvela Solar Aeration Kit

Compatible with Durvela Solar Aeration Fan Kit

Designed for use with:
• Durvela Solar Aeration Fan Kit
• WAGO 221-412 Fuse Connector
• 12V regulated DC power supplies with 5.5 × 2.1 mm plug
• JST PH2.0 fan connections

Not intended for voltages above 12V DC.

Provides backup 12V DC power when solar output is unavailable
Panel-mount 5.5 × 2.1 mm DC barrel socket
Compatible with the Durvela Solar Aeration Fan Kit
White JST PH2.0 connector plugs directly into the fan
Red insulated ferrule inserts into the fused WAGO connector
100 mm (4 in) pre-wired 22 AWG cable assembly
No soldering required
Includes mounting nut and waterproof rubber dust cap

Input Connector
• 5.5 × 2.1 mm female DC barrel jack

Output Connector
• JST PH2.0 female socket
• Red insulated wire ferrule

Cable Length
• 100 mm (4 in)

Wire Gauge
• 22 AWG

Operating Voltage
• 12V DC

Mounting
• Panel mount
• Threaded body with retaining nut

Included
• DC socket cable assembly
• Mounting nut
• Waterproof rubber dust cap

1. Mount the DC socket in the enclosure using the supplied retaining nut.

2. Connect the white JST PH2.0 connector to the mating connector on the aeration fan.

3. Insert the red insulated ferrule into the fused WAGO 221 Fuse Connector.

4. Connect a regulated 12V DC power adapter with a 5.5 × 2.1 mm plug.

5. During periods of insufficient sunlight, the DC adapter powers the fan through the existing fused circuit.

Installation Guide

Wiring Diagram

For use with regulated 12V DC power supplies only.

The positive wire must be connected through the fused WAGO connector.

Do not connect directly to unregulated power sources.

Ensure polarity is correct before applying power.

Not waterproof unless installed in a weather-resistant enclosure.

Designed for use with the Durvela Solar Aeration Fan Kit and compatible accessories.

Compatible with Durvela Solar Aeration Fan Kit

Designed for use with:
• Durvela Solar Aeration Fan Kit
• WAGO 221-412 Fuse Connector
• 12V regulated DC power supplies with 5.5 × 2.1 mm plug
• JST PH2.0 fan connections

Not intended for voltages above 12V DC.

Provides backup 12V DC power when solar output is unavailable
Panel-mount 5.5 × 2.1 mm DC barrel socket
Compatible with the Durvela Solar Aeration Fan Kit
White JST PH2.0 connector plugs directly into the fan
Red insulated ferrule inserts into the fused WAGO connector
100 mm (4 in) pre-wired 22 AWG cable assembly
No soldering required
Includes mounting nut and waterproof rubber dust cap

Input Connector
• 5.5 × 2.1 mm female DC barrel jack

Output Connector
• JST PH2.0 female socket
• Red insulated wire ferrule

Cable Length
• 100 mm (4 in)

Wire Gauge
• 22 AWG

Operating Voltage
• 12V DC

Mounting
• Panel mount
• Threaded body with retaining nut

Included
• DC socket cable assembly
• Mounting nut
• Waterproof rubber dust cap

1. Mount the DC socket in the enclosure using the supplied retaining nut.

2. Connect the white JST PH2.0 connector to the mating connector on the aeration fan.

3. Insert the red insulated ferrule into the fused WAGO 221 Fuse Connector.

4. Connect a regulated 12V DC power adapter with a 5.5 × 2.1 mm plug.

5. During periods of insufficient sunlight, the DC adapter powers the fan through the existing fused circuit.

Installation Guide

Wiring Diagram

For use with regulated 12V DC power supplies only.

The positive wire must be connected through the fused WAGO connector.

Do not connect directly to unregulated power sources.

Ensure polarity is correct before applying power.

Not waterproof unless installed in a weather-resistant enclosure.

Designed for use with the Durvela Solar Aeration Fan Kit and compatible accessories.